• To change the product information on your sensor, select [Sensors] from the menu on the left of your dashboard, or bottom right if using mobile app.
• Select the sensor you wish to update. Sensors may be sorted and filtered using product type, location, sensor type, status and capability.
• Once the sensor has been selected, you will see what product is being tracked, e.g. Co2. Click product name. If product not yet set up, you will see a "Connect Product" icon.
• Click [Manage] or pencil icon if using app.
• Here, you will be able to update product name, empty size, full size, unit of measurement or delete the product if necessary.
• When editing theproduct information, create a name that distinctly reflects the container, product type, and capacity for product management (e.g., Argon 1500L Titan 300PSI) and enter empty size (i.e., value at 0% full), full size (i.e., value at 100% full)
• Make changes as needed, then click [Update product].
• Update confirmation notice will appear at the top of the screen to confirm changes.

Note: Changing product information will impact all sensors connected to that product. You will receive a message if the product you are making changes to will affect other sensors.

• You can also simply select [Products] from the dash menu, which will list all products in use within your companies.
• Product page will display all other sensors tracking selected product, their locations and current size, which can be viewed in percentage or inches, and empty and full size of product.
• Click [Manage] or pencil icon if using app.
• Here, you will be able to update product name, empty size, full size, unit of measurement or delete the product if necessary.
• When editing theproduct information, create a name that distinctly reflects the container, product type, and capacity for product management (e.g., Argon 1500L Titan 300PSI) and enter empty size (i.e., value at 0% full), full size (i.e., value at 100% full)
• Make changes as needed, then click [Update product].

Note: Changing product information will impact all sensors connected to that product. You will receive a message if the product you are making changes to will affect other sensors.